Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's discreet, doesn't use key fobs or LED indicators and is concealed within the vehicle's wiring.
The user can also deactivate the system temporarily by using Transport Mode when renting out their car. This guide will guide you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is linked directly to the ECU of your vehicle and secured by a PIN code that you choose. It's undetectable to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is advised to ensure a perfect connection with the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. Once this is done, the installer can safely begin work. Basic hand tools are helpful to make precise connections and a multimeter can be used to verify electrical values and ensure safety. ghost 2 immobiliser problems and cable tie are essential to protect connections and ensure that wiring is neat. In addition, the user's manual offers specific instructions specific to the Ghost Immobiliser model you have.
During the installation, it is important to choose a grounding point that's free of any paint or debris. Installers should also ensure that the immobiliser's wires CAN H & can L are connected to the correct ECU ports. The wires can be plugged into or soldered depending on the model. Using a quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To do this, the customer must press the button for service on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great choice for anyone who frequently rents their vehicle on platforms like Turo. Immobilisers can also reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser if you want to protect your car from theft. It will stop your car from starting even if a criminal steals or copies the key. This is due to its high-tech technology that is designed to stop the car's engine from starting without the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN which allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the ultimate security system that protects your car's pride and joy and preserve its value when you want to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the directions to avoid electrical issues and malfunctions in the system. You'll need to locate a power supply of 12V and a suitable grounding for the chassis of your car. Then, you can start connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, be sure to cover the connections with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other problems.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. If everything is functioning properly, you can install it in a secure place under the dash or elsewhere in the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is an excellent deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks, and it isn't able to be disabled unless you know the code. It is also simple to use and is able to be put into a service valet mode so that your vehicle is not activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. This is due to the fact that it does not transmit and receive radio frequency signals and it relies on CAN data to communicate with your ECU. It also doesn't require modifications to your existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your car and drive away in peace.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking, while protecting the value of your most prized possession. If you have to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) in addition to an earthing point to complete the installation of the Ghost immobiliser. Be sure that they are well-insulated and safe to touch. It is also recommended to use cable ties to bundle and secure the wires, since this will reduce the risk of tampering by potential thieves. Be sure to check the exact locations of these points to avoid mistakes and mark them with the help of tape or a label. It's recommended to check every connection for signs of wear and tear. Connectors that are loose could cause malfunctions in the system, so make sure that they're firmly fixed and well-insulated. Don't forget to test the Ghost Immobiliser after the installation is complete. This will confirm that the unit functions correctly and that all connections and insulation are safe. Make sure to address any issues immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your vehicle's ECU to stop unauthorised engine start. Its innovative technology protects your vehicle from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the most effective security for your vehicle. The Ghost's unmatched features, combined with its subtle design, make it a popular option for both car enthusiasts as well as security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it's important to follow all steps of the installation process. The best place to start is to look over the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the wires required. The next step is to identify the power source as well as grounding points. Once you've located them, you will need to mark the points so that they are easy to locate during installation. In addition, it is essential to use high-quality tools and materials. Hand tools are a must with making precise connections and a multimeter can confirm electrical values and guarantee safety. Insulation tape and cable ties will help keep all connections neat and tidy. Also, a user's guide will provide specific guidance specific to your Ghost model.
It is important to test the system prior to installing it. Enter the PIN code into the system and then start the vehicle. This will ensure that the immobiliser works in the way it was intended, preventing unauthorized vehicle starts. It is recommended that you perform this routinely as part of your regular inspections of your vehicle to ensure that the system is always functioning properly.
Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will protect your pride and joy from potential car thieves. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can also be linked with a Thatcham-approved tracker to detect any attempts to tamper with or steal your vehicle that could lead to the location of your vehicle in the event of it being stolen.
The Ghost is compatible with a range of automobiles, including those from most major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, which ensures that we adhere to strict standards for the installation of our products. This ensures customers, insurance companies, and law enforcement agencies that all installations are performed safely and in a safe manner.